FOXSLF/128-20 - Fox

FOXSLF/128-20 Frequently Asked Questions (FAQs)

• What is the recommended operating temperature range for the FOXSLF/128-20?
  The recommended operating temperature range for the FOXSLF/128-20 is -40°C to +85°C, as specified in the datasheet. However, it's essential to note that the device's performance and accuracy may vary outside this range.
• How do I ensure the FOXSLF/128-20 oscillator starts up reliably?
  To ensure reliable startup, Fox Electronics recommends using a 10kΩ to 20kΩ pull-up resistor on the EN (enable) pin, and a 100nF to 1μF decoupling capacitor on the VDD pin. Additionally, ensure the power supply is stable and within the recommended voltage range.
• What is the typical current consumption of the FOXSLF/128-20?
  The typical current consumption of the FOXSLF/128-20 is around 10mA to 15mA, depending on the frequency and output load. However, this value can vary depending on the specific application and operating conditions.
• Can I use the FOXSLF/128-20 in a high-vibration environment?
  While the FOXSLF/128-20 is designed to be robust, it's essential to ensure proper mounting and mechanical support to withstand high-vibration environments. Fox Electronics recommends following their recommended mounting guidelines and using a suitable vibration-dampening material if necessary.
• How do I troubleshoot issues with the FOXSLF/128-20 oscillator not oscillating?
  To troubleshoot issues with the FOXSLF/128-20 oscillator not oscillating, check the power supply voltage, ensure the EN pin is properly pulled up, verify the crystal resonator is correctly connected, and inspect the PCB layout for any potential noise or interference issues.