FOXSLF/160-20 footprint, schematic symbol and 3D model by Fox

Symbol

PCB Footprints

3D Models

FOXSLF/160-20 Details

Fox Electronics recommends using a 10uF capacitor in parallel with a 100nF capacitor, placed as close to the VCC pin as possible, to ensure stable operation.
To ensure reliable startup, Fox Electronics recommends applying power to the VCC pin slowly (dv/dt < 1V/ms) and using a pull-up resistor (1kΩ to 10kΩ) on the EN pin to prevent unwanted oscillations during power-up.
The FOXSLF/160-20 has a maximum frequency deviation of ±100 ppm over the operating temperature range of -40°C to +85°C.
Yes, the FOXSLF/160-20 can be used in systems with multiple power domains, but ensure that the oscillator is powered from a stable, noise-free power rail, and consider using a voltage regulator to isolate the oscillator from other power domains.
To troubleshoot issues, check the power supply voltage, ensure proper decoupling, verify the EN pin is properly biased, and use an oscilloscope to verify the oscillator output frequency and amplitude.

Community Provided

System Verified

Community Approved

Use the download button to access the FOXSLF/160-20 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like FOXSL, or try a keyword search, such as Quartz Crystals

If you searched for FOXSLF/160-20, you might also be interested in these parts:

Showing 0 results

Image	Part Number	Model
	FC4STCBMF16.000 Fox Electronics Parallel - Fundamental Quartz Crystal, 16MHz Nom
For a full list of alternate parts for FOXSLF/160-20, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →