A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. Keep the component away from heat sources and ensure good airflow.
Use a soldering iron with a temperature of 250°C to 270°C. Apply a small amount of solder paste to the pads, and use a reflow oven or a hot air gun to solder the component.
The maximum allowed voltage on the input pins is 5.5V. Exceeding this voltage may damage the component.
The FR107-G is rated for operation up to 125°C. However, it's recommended to derate the component's power handling at high temperatures to ensure reliability.
Check the input voltage, output voltage, and current consumption. Verify the PCB layout and soldering quality. Consult the datasheet and application notes for troubleshooting guidelines.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FR107-G Overview
Use the download button to access the FR107-G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FR107,
or try a keyword search, such as Rectifier Diodes