FREE WHEELING DIODE, LOW LEAKAGE CURRENT, LOW POWER LOSS
Application:
EFFICIENCY
Breakdown Voltage-Min:
1000 V
Configuration:
SINGLE
Diode Element Material:
SILICON
Diode Type:
RECTIFIER DIODE
Forward Voltage-Max (VF):
1.3 V
JEDEC-95 Code:
DO-219AA
JESD-30 Code:
R-PDSO-F2
JESD-609 Code:
e3
Moisture Sensitivity Level:
1
Non-rep Pk Forward Current-Max:
30 A
Number of Elements:
1
Number of Phases:
1
Number of Terminals:
2
Operating Temperature-Max:
150 °C
Operating Temperature-Min:
-55 °C
Output Current-Max:
1 A
Package Body Material:
PLASTIC/EPOXY
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE
Peak Reflow Temperature (Cel):
260
Reference Standard:
AEC-Q101
Rep Pk Reverse Voltage-Max:
1000 V
Reverse Current-Max:
5 µA
Reverse Recovery Time-Max:
0.5 µs
Reverse Test Voltage:
1000 V
Surface Mount:
YES
Terminal Finish:
Matte Tin (Sn)
Terminal Form:
FLAT
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
30
FRS1ME-7 Frequently Asked Questions (FAQs)
A good PCB layout for the FRS1ME-7 should minimize parasitic inductance and capacitance. Place the device close to the power source, use short and wide traces, and avoid vias under the device. A solid ground plane and a separate power plane can also help reduce noise and improve performance.
The FRS1ME-7 has a high power density, so thermal management is crucial. Ensure good airflow around the device, use a heat sink if possible, and avoid blocking the thermal pad. The thermal pad should be connected to a solid ground plane or a thermal relief pattern to dissipate heat efficiently.
The maximum allowed voltage on the enable pin (EN) of the FRS1ME-7 is 6V. Exceeding this voltage may damage the device. It's recommended to use a voltage divider or a level shifter if the control signal is higher than 6V.
The FRS1ME-7 is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. It's essential to consider the thermal management and derate the device's power handling according to the temperature derating curve in the datasheet.
To troubleshoot issues with the FRS1ME-7, start by checking the input voltage, output current, and temperature. Verify that the device is properly soldered and that the PCB layout is correct. Check for any signs of physical damage, such as cracks or burn marks. Use an oscilloscope to monitor the input and output waveforms, and consult the datasheet and application notes for guidance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
FRS1ME-7 Overview
Use the download button to access the FRS1ME-7 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like FRS1M,
or try a keyword search, such as Rectifier Diodes
