Part Image

FSA5157L6X - onsemi

Description: Control Logic is 1.8V CMOS Logic Compatible; FSA5157 Features Less than 12µA ICCT Current When S Input is Lower than VCC; 0.25Ω Maximum RON Flatness for +2.7V Supply; Typical 0.4Ω On Resistance (RON) for +2.7V Supply; Low THD (0.02% Typical for 32Ω Load); 1.0mm x 1.45mm 6-Lead MicroPak™ Package; High-Current Handling Capability (350mA Continuous Current Under 3.3V Supply); Broad VCC Operating Range: 1.65V to 4.3V

Download FSA5157L6X Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
FSA5157L6X - onsemi PCB footprint - Other - Other - FSA5157L6X-2
click to zoom
3D Models
FSA5157L6X - onsemi  - 3D model - Other - FSA5157L6X-2
click to zoom

FSA5157L6X Details

  • Manufacturer Part Number:

    FSA5157L6X

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SIP-6

  • Package Description:

    MICROPACK-6

  • Manufacturer Package Code:

    127EB

  • Country Of Origin:

    Thailand

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    10 Weeks

  • Manufacturer:

    onsemi

  • YTEOL:

    8

  • Analog IC - Other Type:

    SPDT

  • JESD-30 Code:

    R-XDSO-N6

  • JESD-609 Code:

    e4

  • Length:

    1.45 mm

  • Moisture Sensitivity Level:

    1

  • Normal Position:

    NO

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Off-state Isolation-Nom:

    75 dB

  • On-state Resistance Match-Nom:

    0.12 Ω

  • On-state Resistance-Max (Ron):

    0.8 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC6,.04,20

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.55 mm

  • Supply Voltage-Max (Vsup):

    4.3 V

  • Supply Voltage-Min (Vsup):

    1.65 V

  • Supply Voltage-Nom (Vsup):

    2.3 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    40 ns

  • Switch-on Time-Max:

    65 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    1 mm

FSA5157L6X Frequently Asked Questions (FAQs)

  • A good PCB layout for the FSA5157L6X involves keeping the input and output traces short and wide, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
  • To ensure proper biasing, connect the VCC pin to a stable voltage source, and the GND pin to a solid ground plane. The EN pin should be tied to a logic high or low depending on the desired state. The FB pin should be connected to a resistive divider to set the output voltage.
  • The FSA5157L6X has a thermal pad that must be connected to a solid ground plane for heat dissipation. A thermal interface material (TIM) can be used to improve heat transfer. The device can operate up to 125°C, but derating is recommended for high-temperature applications.
  • To troubleshoot issues, check the input voltage, output voltage, and enable pin voltage. Verify that the device is properly biased and that the output is not overloaded. Use an oscilloscope to check for oscillations or noise on the output. Consult the datasheet and application notes for guidance.
  • To minimize EMI, use a shielded inductor, keep the input and output traces short, and use a common-mode choke on the input. Place the device away from sensitive circuits and use a Faraday shield if necessary. Follow good PCB layout practices and use EMI filters if required.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

FSA5157L6X Overview

Use the download button to access the FSA5157L6X schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FSA51, or try a keyword search, such as Multiplexers or Switches

Parts related to FSA5157L6X

Showing 0 results

FSA5157L6X Alternates

Showing results

Image Part Number Model
Part Image FSA5157L6X Rochester Electronics LLC

1-CHANNEL, SGL POLE DOUBLE THROW SWITCH, DSO6, 1 MM, LEAD FREE, MICROPACK-6

Part Image FSA5157L6X Fairchild Semiconductor Corporation

SPDT, 1 Func, 1 Channel, CMOS, DSO6