FT2232H-56Q-REEL footprint, schematic symbol and 3D model by FTDI Chip

Symbol

PCB Footprints

3D Models

FT2232H-56Q-REEL Details

The maximum cable length supported by the FT2232H is dependent on the baud rate and the quality of the cable. As a general guideline, FTDI recommends a maximum cable length of 3 meters at 12 Mbps and 1.5 meters at 480 Mbps.
The FT2232H can be configured for I2C or SPI modes using the MPSSE (Multi-Protocol Synchronous Serial Engine) commands. The MPSSE commands can be sent to the device using the FTDI's D2XX driver or the LibFTDI library.
The power consumption of the FT2232H depends on the operating mode and the clock frequency. In USB mode, the typical power consumption is around 200 mA at 3.3V. In UART mode, the typical power consumption is around 50 mA at 3.3V.
Yes, the FT2232H can be used as a USB-to-serial converter. It supports UART, I2C, SPI, and JTAG interfaces, making it a versatile device for various serial communication applications.
The FT2232H supports hardware flow control using RTS/CTS signals. The device can also be configured for software flow control using XON/XOFF characters.

Community Provided

System Verified

Community Approved

Use the download button to access the FT2232H-56Q-REEL schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like FT223, or try a keyword search, such as Bus Controllers

If you searched for FT2232H-56Q-REEL, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →