FT2232HL-TRAY footprint, schematic symbol and 3D model by FTDI Chip

Symbol

PCB Footprints

3D Models

FT2232HL-TRAY Details

The maximum cable length supported by the FT2232HL is 3 meters (10 feet) for full-speed devices and 1 meter (3.3 feet) for low-speed devices.
No, the FT2232HL is not a USB hub. It is a USB-to-serial/FIFO IC that can only connect to a single downstream device.
The FT2232HL can be configured for I2C or SPI mode using the MPSSE (Multi-Protocol Synchronous Serial Engine) commands. Refer to the FTDI application note AN_113 for more information.
The maximum data transfer rate of the FT2232HL is 480 Mbps (full-speed USB) or 12 Mbps (low-speed USB).
Yes, the FT2232HL can operate with a 5V power supply, but it is recommended to use a 3.3V power supply for optimal performance and to reduce power consumption.

Community Provided

System Verified

Community Approved

Use the download button to access the FT2232HL-TRAY schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like FT223, or try a keyword search, such as Bus Controllers

If you searched for FT2232HL-TRAY, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →