FT2232HQ-REEL footprint, schematic symbol and 3D model by FTDI Chip

Symbol

PCB Footprints

3D Models

FT2232HQ-REEL Details

The maximum cable length supported by the FT2232HQ-REEL is approximately 3 meters (10 feet) for full-speed devices and 1.5 meters (5 feet) for low-speed devices, assuming a good quality cable with proper shielding and termination.
No, the FT2232HQ-REEL is not a USB hub. It is a USB-to-UART/FIFO IC that provides a single USB interface and two UART/FIFO interfaces. It does not support multiple downstream USB ports.
The FT2232HQ-REEL can operate at 3.3V or 2.5V by connecting the VCCIO pin to the desired voltage level. Additionally, the VCCIO pin must be decoupled with a 100nF capacitor to ensure stable operation.
The FT2232HQ-REEL supports data transfer rates up to 12 Mbps for the UART interface and up to 30 Mbps for the FIFO interface.
Yes, the FT2232HQ-REEL can be used with a 5V power supply, but the VCCIO pin must be connected to a 3.3V or 2.5V regulator to ensure proper operation.

Community Provided

System Verified

Community Approved

Use the download button to access the FT2232HQ-REEL schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like FT223, or try a keyword search, such as Bus Controllers

If you searched for FT2232HQ-REEL, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →