The maximum cable length supported by the FT232BL is 3 meters (10 feet) for a reliable connection. However, it's recommended to use a cable length of 1.5 meters (5 feet) or less for optimal performance.
Yes, the FT232BL is 5V tolerant, but it's recommended to use a 3.3V power supply for optimal performance and to reduce power consumption.
The FT232BL can be configured for a specific baud rate using the FTDI Chip's MProg tool or by using the FT_PROG utility. The baud rate can be set using the EEPROM configuration or through the use of an external crystal oscillator.
The maximum data transfer rate of the FT232BL is 3 Mbps (megabits per second). However, the actual data transfer rate may be limited by the system's USB bandwidth and the quality of the cable used.
Yes, the FT232BL is compatible with USB 3.0, but it operates at USB 2.0 speeds. It's recommended to use a USB 2.0 hub or port to ensure reliable operation.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FT232BL-REEL Overview
Use the download button to access the FT232BL-REEL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FT232,
or try a keyword search, such as Bus Controllers
Suggested Parts
If you searched for FT232BL-REEL, you might also be interested in these parts: