FT232HQ-TRAY footprint, schematic symbol and 3D model by FTDI Chip

Symbol

PCB Footprints

3D Models

FT232HQ-TRAY Details

The maximum cable length supported by the FT232HQ is 3 meters (10 feet) for a reliable data transfer rate of 12 Mbps. However, it's recommended to use a cable length of 1.5 meters (5 feet) or less for optimal performance.
Yes, the FT232HQ can operate with a 5V power supply. The device has an internal voltage regulator that can handle input voltages from 4V to 5.5V. However, it's recommended to use a 3.3V power supply for optimal performance and to reduce power consumption.
To configure the FT232HQ for a 921600 baud rate, you need to use the FTDI Chip's MProg programming tool to set the baud rate to 921600. You can also use the FT_Prog utility to configure the device. Note that the maximum baud rate supported by the FT232HQ is 3 Mbps.
The FT232HQ is a USB 2.0 full-speed device and is compatible with USB 3.0 hosts. However, it will only operate at USB 2.0 speeds. If you need a USB 3.0 device, consider using the FT232H or FT2232H devices.
Yes, the FT232HQ has 5V tolerant inputs, which means it can be used with microcontrollers that have 5V logic levels. However, it's recommended to use a level shifter or voltage divider to ensure reliable data transfer.

Expert Contribution

System Verified

Community Approved

Use the download button to access the FT232HQ-TRAY schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like FT232, or try a keyword search, such as Bus Controllers

If you searched for FT232HQ-TRAY, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →