Part Image

FT245RNQ-TRAY - FTDI Chip

Description: UART Interface IC USB Full Speed to Parallel FIFO IC, Includes Oscillator and EEPROM, QFN-32

Download FT245RNQ-TRAY Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
FT245RNQ-TRAY - FTDI Chip PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - VQFN-32-1...
click to zoom
3D Models
FT245RNQ-TRAY - FTDI Chip  - 3D model - Quad Flat No-Lead - VQFN-32-1...
click to zoom

FT245RNQ-TRAY Details

  • Manufacturer Part Number:

    FT245RNQ-TRAY

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Mainland China

  • HTS Code:

    8542.31.00.30

  • Manufacturer:

    FTDI Chip

  • YTEOL:

    7.9

  • Bus Compatibility:

    USB

  • Clock Frequency-Max:

    12.02 MHz

  • Data Transfer Rate-Max:

    60 MBps

  • External Data Bus Width:

    8

  • JESD-30 Code:

    S-XQCC-N32

  • Length:

    5 mm

  • Number of Terminals:

    32

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC32,.2SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Packing Method:

    TRAY

  • Seated Height-Max:

    0.9 mm

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Width:

    5 mm

  • uPs/uCs/Peripheral ICs Type:

    BUS CONTROLLER, UNIVERSAL SERIAL BUS

FT245RNQ-TRAY Frequently Asked Questions (FAQs)

  • The maximum cable length supported by the FT245RNQ is limited by the USB specification, which is 3 meters (10 feet) for a passive cable. However, using an active extension cable or a repeater can extend the cable length up to 10 meters (33 feet) or more.
  • The FT245RNQ can operate at 3.3V or 2.8V by connecting the VCCIO pin to the desired voltage level. Additionally, the VCC pin should be connected to the USB bus voltage (typically 5V) for power. Note that the device's I/O voltage level should match the voltage level of the connected peripherals.
  • The FT245RNQ supports data transfer rates up to 1 Mbps in asynchronous mode and up to 8 Mbps in synchronous mode. However, the actual data transfer rate may be limited by the connected peripherals, cable length, and system configuration.
  • The FT245RNQ supports hardware flow control using the RTS and CTS signals. To implement flow control, connect the RTS output to the CTS input of the connected peripheral, and the CTS output of the peripheral to the RTS input of the FT245RNQ. This allows the devices to control data transmission and prevent data loss.
  • Yes, the FT245RNQ can be used with a 5V microcontroller, but level shifting is required to convert the 5V signals to 3.3V or 2.8V levels compatible with the FT245RNQ. This can be achieved using level translators or voltage dividers.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

FT245RNQ-TRAY Overview

Use the download button to access the FT245RNQ-TRAY schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FT245, or try a keyword search, such as Bus Controllers

Parts related to FT245RNQ-TRAY

Showing 0 results