FX135B-327 footprint, schematic symbol and 3D model by Fox

Symbol

PCB Footprints

FX135B-327 Details

A symmetrical, compact layout with minimal trace lengths and a solid ground plane is recommended. Avoid routing signals near the oscillator's output to minimize noise coupling.
Ensure a clean power supply, decouple the power pins with 10nF to 100nF capacitors, and add a 1kΩ to 10kΩ pull-up resistor on the enable pin (if applicable).
The FX135B-327 has a typical frequency deviation of ±100 ppm over the operating temperature range of -40°C to +85°C.
Yes, but ensure each oscillator has its own decoupling capacitors and a separate power supply connection to minimize noise coupling between oscillators.
Use a spectrum analyzer or oscilloscope to measure the oscillator's output. Check for noise, jitter, or distortion. Verify the power supply, decoupling, and PCB layout.

Expert Contribution

System Verified

Community Approved

Use the download button to access the FX135B-327 schematic symbol and PCB footprint.

To find more CAD model downloads similar to this part, try a partial part number search, like FX135, or try a keyword search, such as Quartz Crystals

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →