Please enter a minimum 3 letters or numbers
Technical Content
Part Image

FXPS7550DI4T1 - NXP

Description: Board Mount Pressure Sensors Pressure Sensor, 3.3V/5V, 20/550kPa, QFN Digital absolute pressure sensor, 20 kPa to 550 kPa

Download FXPS7550DI4T1 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
FXPS7550DI4T1 - NXP - PCB symbol
click to zoom
PCB Footprints
FXPS7550DI4T1 - NXP PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 1573-1
click to zoom
3D Models
FXPS7550DI4T1 - NXP - 3D model - Quad Flat No-Lead - 1573-1
click to zoom

FXPS7550DI4T1 Details

  • Manufacturer Part Number:

    FXPS7550DI4T1

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    NXP Semiconductors

  • YTEOL:

    0

  • JESD-609 Code:

    e3

  • Sensors/Transducers Type:

    PRESSURE SENSOR,CAPACITIVE

  • Terminal Finish:

    Tin (Sn)

FXPS7550DI4T1 Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the power and ground traces as short and wide as possible, and use vias to connect the power and ground planes to the device pins.
  • Use a heat sink with a thermal resistance of less than 10°C/W, and ensure good airflow around the device. Also, consider using a thermal interface material (TIM) to improve heat transfer between the device and heat sink.
  • The maximum allowed voltage on the VCC pin is 5.5V, but it's recommended to keep it within 5V ±10% to ensure reliable operation and minimize power consumption.
  • To configure the device for low-power mode, set the EN pin low and the VCC pin to 3.3V or lower. This will reduce the power consumption to less than 1mA.
  • A 10uF ceramic capacitor with a voltage rating of 6.3V or higher is recommended for VCC decoupling. Place the capacitor as close as possible to the VCC pin.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

FXPS7550DI4T1 Overview

Use the download button to access the FXPS7550DI4T1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FXPS7, or try a keyword search, such as Pressure Sensors

About NXP

NXP Semiconductors is a leading manufacturer of semiconductor devices with a wide range of semiconductor solutions, including microcontrollers, sensors, connectivity solutions, power management ICs, and security solutions. These products are used in a variety of applications such as automotive, industrial automation, smart homes, mobile devices, and more. NXP Semiconductors is one of the world’s largest semiconductor companies and is headquartered in Eindhoven, the Netherlands.

Parts related to FXPS7550DI4T1

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑