Description:The HA-5002 is a monolithic, wideband, high slew rate, high output current, buffer amplifier. Utilizing the advantages of the Intersil D. I. technologies, the HA-5002 current buffer offers 1300V/μs slew rate with 110MHz of bandwidth. The ±200mA output current capability is enhanced by a 3Ω output impedance. The monolithic HA-5002 will replace the hybrid LH0002 with corresponding performance increases. These characteristics range from the 3000kΩ input impedance to the increased output voltage swing. Monolith
Renesas provides a recommended PCB layout guide for the HA2-5002-2, which includes thermal vias, thermal pads, and heat sink attachment guidelines. It's essential to follow this guide to ensure optimal thermal performance and prevent overheating.
The HA2-5002-2 requires a specific power-up and power-down sequencing to prevent damage or malfunction. Renesas recommends following the power-up sequence: VCC, VDD, and then VIN. For power-down, the sequence should be reversed. Additionally, ensure that the input voltage ramps up and down slowly to prevent voltage spikes.
To minimize EMI and RFI, Renesas recommends using a shielded enclosure, keeping the device away from high-frequency sources, and using a ground plane on the PCB. Additionally, ensure that the device's pins are properly terminated, and use EMI filters or chokes if necessary.
Renesas recommends using an external overcurrent protection circuit, such as a fuse or a current sense resistor, to prevent damage from excessive current. The device itself does not have built-in overcurrent protection.
The HA2-5002-2 is a sensitive electronic component and requires proper storage and handling. Renesas recommends storing the device in a dry, cool place, away from direct sunlight and moisture. Handle the device by the edges, avoid touching the pins, and use an anti-static wrist strap or mat to prevent ESD damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
HA2-5002-2 Overview
Use the download button to access the HA2-5002-2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like HA2-5,
or try a keyword search, such as Buffer Amplifiers
