A good PCB layout for the HEV2AN-P-DC15V relay should ensure that the relay is placed at least 5mm away from other components to prevent electromagnetic interference. The PCB should also have a solid ground plane to reduce noise and ensure reliable operation.
To ensure reliable switching, make sure to follow the recommended drive circuit and voltage levels specified in the datasheet. Also, ensure that the relay is properly soldered and that the PCB is clean and free of contaminants.
The maximum switching frequency for the HEV2AN-P-DC15V relay is 30 Hz. Exceeding this frequency may lead to reduced relay life and reliability.
The HEV2AN-P-DC15V relay is rated for operation up to 85°C. However, it's recommended to derate the relay's current handling capacity by 1.5% for every 1°C above 70°C to ensure reliable operation.
To minimize EMI and RFI, use a shielded cable for the relay's coil connections, and ensure that the relay is placed at least 5mm away from other components. Additionally, use a common-mode choke or ferrite bead to filter out high-frequency noise.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
HEV2aN-P-DC15V Overview
Use the download button to access the HEV2aN-P-DC15V 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like HEV2a,
or try a keyword search, such as Power/Signal Relays
