A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The transmitter and receiver should be placed close to the fiber optic connector to minimize EMI. A detailed layout guide is available in the application note AN815.
Ensure that the device is operated within the recommended power supply voltage range (3.3V ± 10%) and that the PCB is designed to minimize thermal resistance. Additionally, follow the recommended thermal management guidelines to prevent overheating.
The HFBR-2528Z supports cable lengths up to 10 km at 1 Gb/s and up to 5 km at 2.5 Gb/s, depending on the fiber type and quality. However, the actual cable length may vary depending on the specific application and fiber optic infrastructure.
Check the power supply voltage, ensure proper PCB layout and routing, and verify that the fiber optic connector is securely connected. Use an oscilloscope to verify the signal integrity and check for any signs of signal degradation or distortion.
The HFBR-2528Z is a SFP+ transceiver module that conforms to the SFP+ MSA (Multi-Source Agreement). It is compatible with other SFP+ transceivers and modules that comply with the SFP+ MSA.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
HFBR-2528Z Overview
Use the download button to access the HFBR-2528Z 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like HFBR-,
or try a keyword search, such as Fiber Optic Receivers
