ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, CASE FV1206, 4 PIN
ECCN Code:
EAR99
Manufacturer:
Mini-Circuits
YTEOL:
7.09
Additional Feature:
TAPE AND REEL
Attenuation Frequency (+/- delta f)-Max:
835000 kHz
Attenuation Frequency (+/- delta f)-Min:
510000 kHz
Attenuation@Freq-Max:
40 dB
Attenuation@Freq-Min:
20 dB
Average Input Power:
7 W
Center or Cutoff Frequency (fo/fc):
1910 MHz
Filter Type:
CERAMIC HPF
Height:
0.94 mm
Input/Output Impedance:
50 OHM
Insertion Loss-Max:
3 dB
JESD-609 Code:
e3
Length:
3.2 mm
Mounting Type:
SURFACE MOUNT
Number of Sections-Max:
7
Number of Sections-Min:
7
Operating Temperature-Max:
100 °C
Operating Temperature-Min:
-55 °C
Terminal Finish:
Tin (Sn) - with Nickel (Ni) barrier
VSWR:
1.5
Width:
1.6 mm
HFCN-1910+ Frequently Asked Questions (FAQs)
A good PCB layout and grounding scheme is crucial for optimal performance. Mini-Circuits recommends a 4-layer PCB with a solid ground plane, and a via-stitched ground plane under the device. The device should be placed near the edge of the board, and the input and output traces should be kept short and away from other signals.
The HFCN-1910+ has a 50 ohm input and output impedance. To impedance match, use a pi-network or a T-network with capacitors and inductors to match the impedance of the device to the system's impedance. Mini-Circuits provides a recommended impedance matching circuit in the application note.
The maximum power handling of the HFCN-1910+ is 1W. Exceeding this power limit may cause damage to the device or affect its performance. It's recommended to use an attenuator or a limiter to prevent over-powering the device.
To reduce the noise figure of the HFCN-1910+, use a low-noise amplifier or a pre-amplifier before the HFCN-1910+. Additionally, ensure that the input signal is strong and clean, and use a high-quality power supply to reduce noise and hum.
The operating temperature range of the HFCN-1910+ is -40°C to 85°C. Operating the device outside this range may affect its performance or reduce its lifespan.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
HFCN-1910+ Overview
Use the download button to access the HFCN-1910+ 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like HFCN-,
or try a keyword search, such as Ceramic Filters
About Mini-Circuits
Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.
