Adam Technologies recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A minimum of 1 oz copper thickness is recommended for the top and bottom layers.
Adam Technologies recommends using a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 220°C. Avoid applying excessive force or pressure during assembly, and ensure the device is handled by the package, not the leads.
The HPH1-A-07-UA is rated for operation from -40°C to 125°C. Performance may degrade above 100°C, and the device may enter thermal shutdown above 125°C. Ensure proper thermal management to maintain optimal performance.
Yes, Adam Technologies recommends taking standard ESD precautions when handling the HPH1-A-07-UA, including using an ESD wrist strap, mat, or workstation, and ensuring all equipment is properly grounded.
Store the HPH1-A-07-UA in its original packaging or a similar ESD-safe container, away from direct sunlight and moisture. Avoid bending or flexing the leads, and handle the device by the package, not the leads.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
HPH1-A-07-UA Overview
Use the download button to access the HPH1-A-07-UA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like HPH1-,
or try a keyword search, such as Headers and Edge Type Connectors
