Adam Technologies recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A minimum of 1 oz copper thickness is recommended for the top layer. Additionally, a thermal pad on the bottom of the device should be connected to a heat sink or a thermal management system.
To ensure reliable operation in high-vibration environments, Adam Technologies recommends securing the device using a screw-down or adhesive mounting method. Additionally, the PCB should be designed with a rigid structure and adequate support to minimize flexure and stress on the device.
According to Adam Technologies, the maximum allowable voltage transient on the input pins is ±20% of the rated voltage for a duration of less than 100 ms. Exceeding this limit may cause damage to the device.
Yes, the HPH2-A-04-UA is designed to operate up to 70,000 feet (21,336 meters) above sea level. However, Adam Technologies recommends consulting with their application engineers to ensure the device meets the specific requirements of the high-altitude application.
The typical lead time for the HPH2-A-04-UA is 12-14 weeks, and the minimum order quantity (MOQ) is 100 pieces. However, these values may vary depending on the specific requirements and availability. It's recommended to contact Adam Technologies or an authorized distributor for the most up-to-date information.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
HPH2-A-04-UA Overview
Use the download button to access the HPH2-A-04-UA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like HPH2-,
or try a keyword search, such as Headers and Edge Type Connectors
