ICM-20602 - TDK

ICM-20602 Frequently Asked Questions (FAQs)

• What is the recommended power-on sequence for the ICM-20602?
  The recommended power-on sequence is to power up the VDDIO pin first, followed by the VDD pin. This ensures that the internal voltage regulators are powered up correctly.
• How do I configure the ICM-20602 for low-power mode?
  To configure the ICM-20602 for low-power mode, set the LP_MODE bit in the POWER_CTL register to '1'. This reduces the current consumption of the device.
• What is the maximum acceleration range of the ICM-20602?
  The maximum acceleration range of the ICM-20602 is ±30g. However, the device can be configured to measure accelerations up to ±16g or ±8g depending on the FS_SEL setting.
• How do I calibrate the ICM-20602?
  The ICM-20602 does not require calibration. The device is factory-calibrated and the calibration data is stored in the device's internal memory.
• What is the maximum data rate of the ICM-20602?
  The maximum data rate of the ICM-20602 is 32 kHz. However, the device can be configured to output data at lower rates, such as 1 kHz or 200 Hz, depending on the application requirements.