IHCL4040DZER220M5A footprint, schematic symbol and 3D model by Vishay

Symbol

PCB Footprints

3D Models

IHCL4040DZER220M5A Details

The recommended PCB footprint for the IHCL4040DZER220M5A is a pad size of 4.5 mm x 4.5 mm with a 1.5 mm hole in the center for the inductor's lead.
The IHCL4040DZER220M5A has a maximum operating temperature of 125°C. Ensure good airflow around the inductor, and consider using a heat sink or thermal interface material if operating in high-temperature environments.
The IHCL4040DZER220M5A has a saturation current rating of 4.5 A. Exceeding this current may cause the inductor to saturate, leading to reduced inductance and potential damage.
Yes, the IHCL4040DZER220M5A is suitable for high-frequency applications up to 1 MHz. However, be aware that the inductor's impedance and losses may increase at higher frequencies.
Use a suitable adhesive, such as a thermally conductive epoxy, to secure the inductor to the PCB. Ensure the inductor is properly aligned with the PCB pads and that the adhesive is fully cured before operating the circuit.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the IHCL4040DZER220M5A schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like IHCL4, or try a keyword search, such as Fixed Inductors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →