IHLE2525CDER100M5A - Vishay

IHLE2525CDER100M5A Frequently Asked Questions (FAQs)

• What is the recommended PCB footprint for the IHLE2525CDER100M5A?
  The recommended PCB footprint for the IHLE2525CDER100M5A is a rectangular pad with dimensions of 2.5 mm x 2.5 mm, with a 1.1 mm diameter hole in the center for the inductor's lead.
• How do I handle the inductor's thermal considerations?
  The IHLE2525CDER100M5A has a maximum operating temperature of 125°C. Ensure good airflow around the inductor, and consider using a heat sink or thermal interface material if the inductor will be operating near its maximum temperature rating.
• What is the inductor's self-resonant frequency (SRF)?
  The SRF of the IHLE2525CDER100M5A is not explicitly stated in the datasheet, but it can be estimated using the inductor's inductance and capacitance values. A rough estimate can be made using the formula SRF ≈ 1 / (2 * π * sqrt(L * C)), where L is the inductance and C is the capacitance.
• Can I use the IHLE2525CDER100M5A in a high-reliability or aerospace application?
  The IHLE2525CDER100M5A is a commercial-grade inductor, and its reliability and performance may not meet the requirements of high-reliability or aerospace applications. Consider using a more specialized inductor or consulting with a Vishay Intertechnologies representative for more information.
• How do I ensure the inductor's magnetic field does not interfere with nearby components?
  To minimize magnetic field interference, ensure a minimum distance of 5 mm between the IHLE2525CDER100M5A and nearby components, and consider using shielding or a magnetic shield to contain the inductor's magnetic field.