The recommended land pattern for IHLP2020CZER150M8A is a rectangular pad with a size of 2.5 mm x 1.5 mm, with a non-solder mask defined (NSMD) pad shape. This is to ensure proper soldering and to prevent solder bridging.
While IHLP2020CZER150M8A has a high operating temperature range of -40°C to +125°C, it's not recommended for extreme high-temperature applications (>150°C) due to potential degradation of the magnetic core and insulation. Consult Vishay's application notes for specific guidance.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the pads. Avoid applying excessive force or pressure, which can damage the component. Also, ensure the PCB is clean and free of oxidation.
The ESR of IHLP2020CZER150M8A is not explicitly stated in the datasheet, but it can be estimated to be around 10-20 mΩ based on similar products in the IHLP series. However, it's recommended to consult Vishay's application notes or contact their technical support for more accurate information.
While IHLP2020CZER150M8A is designed for high-current applications, it's not optimized for high-frequency use (>100 kHz). The inductor's self-resonant frequency is around 10-20 MHz, and using it at higher frequencies may result in reduced performance and increased losses.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
IHLP2020CZER150M8A Overview
Use the download button to access the IHLP2020CZER150M8A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like IHLP2,
or try a keyword search, such as Fixed Inductors
