IHLP2525CZER150M8A footprint, schematic symbol and 3D model by Vishay

Symbol

PCB Footprints

3D Models

IHLP2525CZER150M8A Details

The recommended PCB footprint for the IHLP2525CZER150M8A is a pad size of 2.5 mm x 2.5 mm with a 1.1 mm hole in the center for the inductor's lead.
To minimize the impact of the inductor's self-resonant frequency, ensure that the inductor is used below its self-resonant frequency (SRF) and that the circuit is properly decoupled and filtered.
The maximum current rating for the IHLP2525CZER150M8A is 15.1 A, but this value can be affected by the operating temperature and other factors, so be sure to check the datasheet for derating information.
To handle the inductor's saturation current, ensure that the inductor is not subjected to currents exceeding its saturation current rating, and consider using a current sense resistor or other current limiting measures to prevent saturation.
Store the IHLP2525CZER150M8A in a dry, cool place, away from direct sunlight and moisture. Handle the inductor by the body, not the leads, to prevent damage.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the IHLP2525CZER150M8A schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like IHLP2, or try a keyword search, such as Fixed Inductors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →