The recommended land pattern for IHLP5050EZER150M5A is a rectangular pad with a size of 5.5 mm x 5.5 mm, with a non-solder mask defined (NSMD) pad shape. This is to ensure proper soldering and to prevent solder bridging.
While IHLP5050EZER150M5A has a rated operating temperature range of -40°C to +125°C, it's not recommended for high-temperature applications above 105°C due to potential degradation of the magnetic core and insulation. For high-temperature applications, consider using a high-temperature-rated inductor like IHLP5050EZER150M5A-HT.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the pads. Use a reflow oven with a peak temperature of 240°C to 250°C, and a dwell time of 30 seconds to 60 seconds. Avoid using excessive solder or flux, as this can cause bridging or shorts.
The ESR of IHLP5050EZER150M5A is not explicitly stated in the datasheet, but it can be estimated to be around 10-20 mΩ based on the inductor's design and materials. For more accurate ESR values, consult with Vishay's application engineers or perform your own measurements.
While IHLP5050EZER150M5A is designed for high-current applications, it's not optimized for high-frequency applications above 1 MHz. For high-frequency applications, consider using a high-frequency-rated inductor like IHLP5050EZER150M5A-HF, which has a lower core loss and is designed for frequencies up to 10 MHz.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
IHLP5050EZER150M5A Overview
Use the download button to access the IHLP5050EZER150M5A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like IHLP5,
or try a keyword search, such as Fixed Inductors
