IHLP6767GZER2R2M01 - Vishay

IHLP6767GZER2R2M01 Frequently Asked Questions (FAQs)

• What is the recommended PCB footprint for the IHLP6767GZER2R2M01?
  The recommended PCB footprint for the IHLP6767GZER2R2M01 is a pad size of 6.5 mm x 6.5 mm with a 1.5 mm hole in the center for the inductor's lead.
• How do I handle the inductor's thermal considerations?
  The IHLP6767GZER2R2M01 has a maximum operating temperature of 125°C. Ensure good airflow around the inductor, and consider using a thermal pad or heat sink if the inductor will be operating near its maximum current rating.
• What is the inductor's self-resonant frequency (SRF)?
  The SRF of the IHLP6767GZER2R2M01 is not explicitly stated in the datasheet, but it can be estimated using the inductor's inductance and capacitance values. A rough estimate is around 100-150 MHz.
• Can I use the IHLP6767GZER2R2M01 in a high-vibration environment?
  Yes, the IHLP6767GZER2R2M01 is designed to withstand vibrations up to 20 G. However, it's essential to ensure the inductor is properly secured to the PCB and that the PCB is designed to withstand the vibrations.
• How do I determine the inductor's saturation current?
  The saturation current of the IHLP6767GZER2R2M01 can be determined by using the inductor's inductance and DC resistance values. A rough estimate is around 10-15 A, but this may vary depending on the specific application.