The recommended PCB footprint for the IHLP8787MZER150M5A is a rectangular pad with a length of 4.5 mm, a width of 3.5 mm, and a thickness of 0.5 mm. The pad should have a non-solder mask defined (NSMD) pad shape to ensure proper soldering.
The IHLP8787MZER150M5A has a maximum operating temperature of 125°C. To handle thermal derating, ensure that the inductor is operated within the recommended temperature range, and consider using a heat sink or thermal interface material to reduce the temperature rise.
The SRF of the IHLP8787MZER150M5A is not explicitly stated in the datasheet, but it can be estimated using the inductor's inductance and capacitance values. A rough estimate of the SRF can be calculated using the formula: SRF ≈ 1 / (2 * π * √(L * C)), where L is the inductance and C is the capacitance.
The IHLP8787MZER150M5A is designed for high-frequency applications up to 1 MHz. However, its performance may degrade at higher frequencies due to the inductor's internal capacitance and resistance. It's essential to evaluate the inductor's performance in your specific application and consider using a different inductor if necessary.
To ensure the reliability of the IHLP8787MZER150M5A in a high-reliability application, follow proper storage and handling procedures, use a robust PCB design, and consider using a conformal coating to protect the inductor from environmental factors. Additionally, perform thorough testing and validation to ensure the inductor meets the application's requirements.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
IHLP8787MZER150M5A Overview
Use the download button to access the IHLP8787MZER150M5A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like IHLP8,
or try a keyword search, such as Fixed Inductors
