The recommended PCB footprint for the IHLP8787MZER470M51 is a pad size of 7.3 mm x 6.5 mm with a 1.5 mm hole in the center for the inductor's lead.
The IHLP8787MZER470M51 has a maximum operating temperature of 125°C. Ensure good airflow around the inductor, and consider using a heat sink or thermal interface material if operating in high-temperature environments.
The IHLP8787MZER470M51 has a saturation current rating of 12.5 A. Exceeding this current may cause the inductor to saturate, reducing its inductance and potentially causing system instability.
Yes, the IHLP8787MZER470M51 is suitable for high-frequency applications up to 1 MHz. However, be aware that the inductor's impedance and inductance may vary with frequency, affecting system performance.
Use a soldering iron with a temperature of 260°C to 280°C, and apply a small amount of solder paste to the PCB pads. Ensure the inductor is properly aligned and seated on the PCB before soldering.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
IHLP8787MZER470M51 Overview
Use the download button to access the IHLP8787MZER470M51 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like IHLP8,
or try a keyword search, such as Fixed Inductors
