The maximum operating frequency of the IR2213SPBF is 500 kHz, but it can be operated up to 1 MHz with reduced performance.
To ensure the bootstrap capacitor is properly charged, make sure the high-side driver is enabled before the low-side driver, and the bootstrap capacitor should be at least 10 times the gate charge of the high-side MOSFET.
The recommended dead time between the high-side and low-side drivers is typically around 100-200 ns to prevent shoot-through current.
The UVLO feature is enabled by default, and it can be disabled by connecting the UVLO pin to VCC. If enabled, the device will shut down if the supply voltage falls below 7.5V.
The maximum allowable voltage on the VCC pin is 15V, but it's recommended to keep it below 12V for reliable operation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
IR2213SPBF Overview
Use the download button to access the IR2213SPBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like IR221,
or try a keyword search, such as MOSFET Drivers