Part Image

ISL55100BIRZ-T7A - Renesas Electronics

Description: The ISL55100B is a quad pin driver and window comparator fabricated in a wide voltage CMOS process. It is designed specifically for Test During Burn-In (TDBI) applications, where cost, functional density and power are all at a premium. This IC incorporates four channels of programmable drivers and window comparators into a small 72 Ld QFN package. Each channel has independent driver levels, data and high impedance control. Each receiver has dual comparators, which provide high and low threshold levels. The

Download ISL55100BIRZ-T7A Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ISL55100BIRZ-T7A - Renesas Electronics PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - L72.10x10
click to zoom
3D Models
ISL55100BIRZ-T7A - Renesas Electronics  - 3D model - Quad Flat No-Lead - L72.10x10
click to zoom

ISL55100BIRZ-T7A Details

  • Manufacturer Part Number:

    ISL55100BIRZ-T7A

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    QFN

  • Pin Count:

    72

  • Manufacturer Package Code:

    L72.10X10

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • Interface IC Type:

    BUFFER OR INVERTER BASED PERIPHERAL DRIVER

  • JESD-609 Code:

    e3

  • Moisture Sensitivity Level:

    3

  • Peak Reflow Temperature (Cel):

    260

  • Technology:

    CMOS

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Time@Peak Reflow Temperature-Max (s):

    30

ISL55100BIRZ-T7A Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use short, wide traces for power and ground connections.
  • Ensure good airflow around the device, use a heat sink if necessary, and avoid blocking airflow to the device. Monitor the device's temperature using the thermal monitoring pin (TMP) and take corrective action if it exceeds the specified range.
  • Use a shielded enclosure, keep the device away from antennas and other EMI sources, and use EMI filters on the input and output lines. Ensure good PCB layout practices, such as keeping analog and digital lines separate, and using a common mode choke on the input lines.
  • Use an oscilloscope to monitor the input and output waveforms, check for proper power supply voltage and decoupling, and verify that the device is operating within its specified temperature range. Consult the datasheet and application notes for troubleshooting guides and FAQs.
  • Ensure that the power supplies are sequenced correctly, with the analog supply (VCC) powered up before the digital supply (VDD). Use a power sequencing controller or a simple RC circuit to ensure proper power-up and power-down sequencing.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ISL55100BIRZ-T7A Overview

Use the download button to access the ISL55100BIRZ-T7A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL55, or try a keyword search, such as Peripheral Drivers

Parts related to ISL55100BIRZ-T7A

Showing 0 results

ISL55100BIRZ-T7A Alternates

Showing results

Image Part Number Model
Part Image ISL55100BIRZ-T Renesas Electronics Corporation

Buffer/Inverter Based Peripheral Driver