Part Image

ISL78268ARZ-T7A - Renesas Electronics

Description: The ISL78268 is a grade 1, automotive, synchronous buck controller with integrated high/low side MOSFET drivers. It supports a wide operating input voltage range of 5V to 55V and up to 60V at VIN when not switching. The integrated driver offers adaptive dead-time control and is capable of supplying up to 2A sourcing and 3A sinking current, allowing the ISL78268 to support power stages designed for a wide range of loads, from under 1A to over 25A. ISL78268’s fully synchronous architecture enables power conve

Download ISL78268ARZ-T7A Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ISL78268ARZ-T7A - Renesas Electronics PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 24 Ld QFN _1
click to zoom
3D Models
ISL78268ARZ-T7A - Renesas Electronics  - 3D model - Quad Flat No-Lead - 24 Ld QFN _1
click to zoom

ISL78268ARZ-T7A Details

  • Manufacturer Part Number:

    ISL78268ARZ-T7A

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFN

  • Package Description:

    QFN-24

  • Pin Count:

    24

  • Manufacturer Package Code:

    L24.4X4H

  • Country Of Origin:

    Malaysia, Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    18 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    8

  • Analog IC - Other Type:

    SWITCHING CONTROLLER

  • Control Mode:

    CURRENT-MODE

  • Control Technique:

    PULSE WIDTH MODULATION

  • Input Voltage-Max:

    55 V

  • Input Voltage-Min:

    5 V

  • Input Voltage-Nom:

    12 V

  • JESD-30 Code:

    S-PQCC-N24

  • JESD-609 Code:

    e3

  • Length:

    4 mm

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    24

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC24,.16SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1 mm

  • Supply Current-Max (Isup):

    7 mA

  • Surface Mount:

    YES

  • Switcher Configuration:

    BUCK

  • Switching Frequency-Max:

    1100 kHz

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    4 mm

ISL78268ARZ-T7A Frequently Asked Questions (FAQs)

  • Renesas provides a recommended PCB layout guide in their application note AN1965, which includes guidelines for thermal vias, copper pours, and component placement to minimize thermal resistance and ensure optimal performance.
  • The selection of input and output capacitors depends on the specific requirements of your application, including the input voltage range, output voltage, and ripple current. Renesas provides guidelines for capacitor selection in their application note AN1965, and also recommends using X5R or X7R ceramic capacitors with low ESR and high ripple current capability.
  • While the datasheet specifies an operating temperature range of -40°C to 125°C, Renesas recommends derating the device's power dissipation and output current at high ambient temperatures to ensure reliable operation. A maximum ambient temperature of 105°C is recommended for most applications.
  • The ISL78268ARZ-T7A has a built-in overcurrent protection (OCP) feature that can be enabled by connecting the OCP pin to a resistor and capacitor network. Renesas provides a recommended OCP circuit configuration in their application note AN1965. Additionally, short-circuit protection can be implemented using an external current sense resistor and a comparator or microcontroller.
  • Renesas recommends a specific startup sequence to ensure proper operation and prevent damage to the device. The recommended sequence is: 1) Apply input voltage, 2) Wait for the internal soft-start period (typically 1-2ms), and 3) Enable the output voltage. This sequence helps to prevent inrush currents and ensures a stable output voltage.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ISL78268ARZ-T7A Overview

Use the download button to access the ISL78268ARZ-T7A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL78, or try a keyword search, such as Switching Regulator or Controllers

Parts related to ISL78268ARZ-T7A

Showing 0 results

ISL78268ARZ-T7A Alternates

Showing results

Image Part Number Model
Part Image ISL78268ARZ Renesas Electronics Corporation

Switching Controller, Current-mode, 1100kHz Switching Freq-Max, PQCC24

Part Image ISL78268ARZ-T7 Renesas Electronics Corporation

Switching Controller, Current-mode, 1100kHz Switching Freq-Max, PQCC24

Part Image ISL78268ARZ-T13 Renesas Electronics Corporation

Switching Controller, Current-mode, 1100kHz Switching Freq-Max, PQCC24