Description:The ISL9111 and ISL9111A provide a power supply solution for single-cell, dual-cell, or three-cell alkaline, NiCd or NiMH battery-powered applications. The device has a typical 0.8V start-up voltage and is capable of supplying up to 5.25V output voltage. Both devices are guaranteed to supply 100mA from a single-cell input and 240mA from a dual-cell input when output is 3.3V. High 1.2MHz switching frequency allows for the use of tiny, low-profile inductors and ceramic capacitors to minimize the size of the s
Renesas provides a recommended PCB layout in the datasheet, but it's also recommended to follow general best practices for switching regulator layout, such as keeping the input and output capacitors close to the IC, using a solid ground plane, and minimizing trace lengths and widths.
To ensure stability, follow the datasheet's guidelines for output capacitor selection, and make sure the output capacitor's ESR is within the recommended range. Additionally, ensure that the input capacitor is properly sized and placed close to the IC. Finally, verify that the PCB layout is well-designed and doesn't introduce any unwanted parasitic inductances or capacitances.
The ISL9111EH33Z-T has an operating ambient temperature range of -40°C to +125°C, but the maximum junction temperature (TJ) is 150°C. Ensure that the device is properly cooled and the thermal design is adequate to prevent overheating.
Yes, the ISL9111EH33Z-T is designed to be robust and can operate in high-vibration environments. However, it's essential to ensure that the PCB is properly secured and the components are well-soldered to prevent mechanical stress and vibration-induced failures.
Start by verifying the input voltage, output voltage, and current consumption using an oscilloscope or a multimeter. Check the PCB layout and component values to ensure they match the recommended design. If the issue persists, consult the datasheet's troubleshooting section or contact Renesas' technical support for further assistance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL9111EH33Z-T Overview
Use the download button to access the ISL9111EH33Z-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL91,
or try a keyword search, such as Switching Regulator or Controllers
