XP Power recommends a PCB layout with a large copper area connected to the tab of the ISP2409A to dissipate heat effectively. A minimum of 1 oz copper thickness is recommended, and the copper area should be connected to a solid ground plane to reduce thermal resistance.
To ensure reliable start-up, XP Power recommends a soft-start circuit to limit the inrush current during power-on. A resistive divider network can be used to slow down the voltage rise at the input, allowing the ISP2409A to start up smoothly.
The maximum allowed capacitance on the output of the ISP2409A is 10uF. Exceeding this value may cause instability or oscillation in the output voltage. It is recommended to use a capacitor with a low ESR (Equivalent Series Resistance) to minimize the risk of oscillation.
The ISP2409A is rated for operation up to 85°C ambient temperature. However, derating is required for temperatures above 70°C. XP Power recommends consulting the datasheet for derating curves and ensuring that the device is properly heat-sinked to maintain a safe operating temperature.
To troubleshoot output voltage instability or oscillation issues, XP Power recommends checking the output capacitor value and ESR, ensuring proper PCB layout and thermal management, and verifying that the input voltage is within the recommended range. Additionally, checking for any noise or ripple on the input voltage and ensuring that the ISP2409A is properly decoupled from the input can help resolve the issue.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISP2409A Overview
Use the download button to access the ISP2409A schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like ISP24,
or try a keyword search, such as Power Supply Modules
