XP Power recommends a PCB layout with a large copper area connected to the module's thermal pad to dissipate heat efficiently. A minimum of 2 oz copper thickness is recommended, and the copper area should be at least 1 inch x 1 inch in size.
Yes, the JCK5024S12 is designed to withstand high-vibration environments. It meets the IEC 60068-2-6 vibration test standard, which ensures it can operate reliably in applications with vibrations up to 10 G peak acceleration.
The JCK5024S12 has an internal input filter that meets the CISPR 22 Class B EMC standard. However, to ensure compliance with your system's specific EMC requirements, you may need to add additional external filtering components. Consult XP Power's application notes and EMC guidelines for more information.
XP Power recommends keeping the output cables as short as possible to minimize voltage drops and ensure reliable operation. However, if longer cables are necessary, the maximum recommended length is 12 inches (30 cm) for the 24V output and 6 inches (15 cm) for the 12V output.
Yes, the JCK5024S12 can be used in redundant or parallel configurations to achieve higher power output or redundancy. However, you must ensure that the modules are properly synchronized and configured to avoid any potential issues. Consult XP Power's application notes and technical support for guidance on implementing such configurations.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
JCK5024S12 Overview
Use the download button to access the JCK5024S12 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like JCK50,
or try a keyword search, such as Power Supply Modules
