A thermal pad on the bottom of the package should be connected to a large copper area on the PCB to dissipate heat. Multiple vias can be used to connect the thermal pad to an inner layer or the backside of the PCB for better heat dissipation.
The KBP2005G requires a minimum of 1mA of current to ensure proper biasing. A resistor can be added between the AC input and the rectifier input to ensure the minimum current is met.
The maximum allowable voltage imbalance is ±10% of the rated voltage. Exceeding this imbalance may cause the bridge rectifier to malfunction or fail.
Yes, the KBP2005G can be used in switching power supply applications, but it's essential to ensure the rectifier is properly snubbed to prevent voltage spikes and ringing.
A surge protection device, such as a transient voltage suppressor (TVS) or a metal oxide varistor (MOV), can be used to protect the KBP2005G from surge currents. The device should be selected based on the expected surge current and voltage.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
KBP2005G Overview
Use the download button to access the KBP2005G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like KBP20,
or try a keyword search, such as Bridge Rectifier Diodes
Suggested Parts
If you searched for KBP2005G, you might also be interested in these parts: