The recommended soldering temperature is 260°C (500°F) with a maximum soldering time of 3 seconds. Exceeding this temperature or time may damage the thermistor.
Handle the KSD82 by the glass body only, avoiding touching the metal leads or wire. Use a clean, dry, and static-free environment to prevent electrostatic discharge (ESD) damage.
The maximum power rating for the KSD82 is 10 mW. Exceeding this power rating may cause the thermistor to overheat, leading to inaccurate readings or damage.
While the KSD82 is designed for general-purpose applications, it's not recommended for use in high-humidity (>80% RH) or high-temperature (>150°C) environments without proper protection, such as conformal coating or hermetic sealing.
Calibration is not typically required for the KSD82, as it's a standardized thermistor with a known temperature-resistance curve. However, if high accuracy is required, consult the OTAX Corporation application note for calibration procedures.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
KSD82 Overview
Use the download button to access the KSD82 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as DIP Switches
Suggested Parts
If you searched for KSD82, you might also be interested in these parts: