KTR03EZPJ332 footprint, schematic symbol and 3D model by ROHM Semiconductor

Symbol

PCB Footprints

3D Models

KTR03EZPJ332 Details

ROHM recommends a thermal pad size of at least 2.5mm x 2.5mm, with multiple vias to the ground plane to ensure efficient heat dissipation. A thermal resistance of 10°C/W or less is recommended.
ROHM recommends derating the power dissipation according to the temperature derating curve in the datasheet. Additionally, ensure proper thermal design, and consider using a heat sink or thermal interface material if necessary.
The maximum allowed voltage for the EN pin is VCC + 0.3V, but it's recommended to keep it within VCC to prevent latch-up or damage to the internal circuitry.
Yes, the KTR03EZPJ332 can be used in switching regulator applications, but ensure that the switching frequency is within the recommended range (typically 100kHz to 1MHz) and that the output voltage is properly filtered to prevent noise and oscillations.
The output voltage tolerance can be calculated by adding the output voltage accuracy (±1.5% for the KTR03EZPJ332) to the temperature coefficient (±0.05%/°C) multiplied by the operating temperature range.

Machine Generated

System Verified

Community Approved

Use the download button to access the KTR03EZPJ332 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like KTR03, or try a keyword search, such as Fixed Resistors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →