ROHM recommends a thermal pad size of at least 2.5mm x 2.5mm with multiple vias to the ground plane to ensure good heat dissipation. Additionally, keeping the PCB layer stack-up symmetrical and using a thermal relief pattern around the thermal pad can help reduce thermal resistance.
To ensure reliable operation in high-temperature environments, it's essential to follow proper derating guidelines, ensure good thermal design, and consider using a heat sink or thermal interface material. ROHM also recommends using a thermistor or temperature sensor to monitor the device temperature and implement thermal protection if necessary.
According to ROHM, the maximum allowed voltage on the enable pin (EN) is VCC + 0.3V. Exceeding this voltage may cause damage to the device. It's recommended to use a voltage limiter or a voltage divider to ensure the enable pin voltage remains within the specified range.
Yes, the KTR10EZPJ302 can be used in switching regulator applications. However, it's essential to ensure that the device is properly bypassed with a capacitor and that the switching frequency is within the recommended range (typically < 1MHz). Additionally, the device's power dissipation and thermal performance should be carefully evaluated to ensure reliable operation.
ROHM recommends using a low-ESR ceramic capacitor (X5R or X7R dielectric) with a value of 1uF to 10uF as the input capacitor. This helps to reduce noise and ensure stable operation. The capacitor should be placed as close to the device as possible to minimize parasitic inductance.
Trust Checks
This model has been generated by a fully automated process.
Machine Generated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
KTR10EZPJ302 Overview
Use the download button to access the KTR10EZPJ302 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like KTR10,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
