LEM recommends a symmetrical PCB layout with a ground plane to minimize noise and electromagnetic interference. A minimum of 2oz copper thickness is recommended for the current paths.
To ensure accurate current measurement, make sure to connect the sense lines as close as possible to the current-carrying conductor, and use twisted pair cables to minimize electromagnetic interference. Also, ensure that the sense lines are not routed near high-voltage or high-current paths.
The LA100-P/SP13 can operate within a temperature range of -40°C to 125°C, but the accuracy and linearity of the current measurement may be affected above 85°C. It's recommended to derate the device's performance above 85°C.
Yes, the LA100-P/SP13 is designed to withstand high-vibration environments. However, it's recommended to follow proper mounting and soldering procedures to ensure the device's reliability and accuracy.
Calibration is not required for the LA100-P/SP13, as it is a self-calibrating device. However, it's recommended to perform a zero-adjustment procedure to ensure optimal accuracy and linearity.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LA100-P/SP13 Overview
Use the download button to access the LA100-P/SP13 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LA100,
or try a keyword search, such as Other Sensors/Transducers
