LCC110PTR - LITTELFUSE

LCC110PTR Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal thermal performance?
  For optimal thermal performance, it is recommended to use a large copper pad under the device, connect it to a solid ground plane, and use thermal vias to dissipate heat. A minimum of 2oz copper thickness is recommended.
• How do I ensure reliable soldering of the LCC110PTR?
  To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 180°C to 190°C. Apply a small amount of solder paste to the pads, and use a reflow oven or a hot air gun to solder the device.
• What is the maximum surge current rating for the LCC110PTR?
  The LCC110PTR has a surge current rating of 100A for 8/20μs waveform, and 50A for 10/1000μs waveform. However, it's recommended to derate the surge current based on the application's specific requirements.
• Can I use the LCC110PTR in high-frequency applications?
  The LCC110PTR is designed for low-frequency applications up to 100kHz. For high-frequency applications, it's recommended to use a different device, such as the LCC120PTR, which is designed for high-frequency applications up to 1MHz.
• What is the recommended storage temperature range for the LCC110PTR?
  The recommended storage temperature range for the LCC110PTR is -40°C to 125°C. Storage outside this range may affect the device's reliability and performance.