Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LFCN-1000D+ - Mini-Circuits

Description: Signal Conditioning LOW PASS FLTR / SURF MT / RoHS

Download LFCN-1000D+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LFCN-1000D+ - Mini-Circuits - PCB symbol
click to zoom
PCB Footprints
LFCN-1000D+ - Mini-Circuits PCB footprint - Other - Other - LFCN-1000D+-1
click to zoom
3D Models
LFCN-1000D+ - Mini-Circuits - 3D model - Other - LFCN-1000D+-1
click to zoom

LFCN-1000D+ Details

  • Manufacturer Part Number:

    LFCN-1000D+

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    ROHS COMPLIANT, CERAMIC, CASE FV1206, 4 PIN

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • Manufacturer:

    Mini-Circuits

  • YTEOL:

    7.44

  • Additional Feature:

    TAPE AND REEL

  • Attenuation Frequency (+/- delta f)-Max:

    600000 kHz

  • Attenuation Frequency (+/- delta f)-Min:

    300000 kHz

  • Attenuation@Freq-Max:

    30 dB

  • Attenuation@Freq-Min:

    20 dB

  • Average Input Power:

    10 W

  • Center or Cutoff Frequency (fo/fc):

    1300 MHz

  • Filter Type:

    CERAMIC LPF

  • Height:

    0.94 mm

  • Input/Output Impedance:

    50 OHM

  • Insertion Loss-Max:

    3 dB

  • JESD-609 Code:

    e3

  • Length:

    3.2 mm

  • Mounting Type:

    SURFACE MOUNT

  • Number of Sections-Max:

    7

  • Number of Sections-Min:

    7

  • Number of Terminals:

    4

  • Operating Temperature-Max:

    100 °C

  • Operating Temperature-Min:

    -55 °C

  • Terminal Finish:

    Matte Tin (Sn) - with Nickel (Ni) barrier

  • VSWR:

    1.3

  • Width:

    1.6 mm

LFCN-1000D+ Frequently Asked Questions (FAQs)

  • Mini-Circuits recommends a 4-layer PCB with a solid ground plane, and a via-stitched ground plane on the top and bottom layers. The device should be placed near the edge of the board, with the input and output ports facing away from each other. A low-impedance path to ground is essential for the device's internal biasing network.
  • The LFCN-1000D+ requires a single +12V to +15V power supply, and a bias current of 100mA to 150mA. Ensure that the power supply is well-regulated and has low ripple. A 10uF to 22uF decoupling capacitor should be placed close to the device's power pin.
  • The LFCN-1000D+ can handle input powers up to +20dBm (100mW) without damage. However, for optimal performance and linearity, it is recommended to keep the input power below +15dBm (30mW).
  • For optimal noise figure performance, ensure that the input and output ports are properly matched to 50 ohms. Use a high-quality, low-loss coaxial cable for the input and output connections. Additionally, keep the device's operating temperature below 60°C (140°F) to minimize thermal noise.
  • The LFCN-1000D+ typically consumes around 120mA to 140mA of current from the +12V to +15V power supply, depending on the operating conditions and input power level.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LFCN-1000D+ Overview

Use the download button to access the LFCN-1000D+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LFCN-, or try a keyword search, such as Ceramic Filters

About Mini-Circuits

Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.

Parts related to LFCN-1000D+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LFCN-1000D+ Alternates

Showing results

Image Part Number Model
Part Image LFCN-1000D Mini-Circuits

Ceramic LPF, 7 Section(s) Min, 7 Section(s) Max, 1300MHz