Part Image

LFCN-1525+ - Mini-Circuits

Description: LTCC Low Pass Filter, DC - 1525 MHz, 50Ω

Download LFCN-1525+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
LFCN-1525+ - Mini-Circuits  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

LFCN-1525+ Details

  • Manufacturer Part Number:

    LFCN-1525+

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    ROHS COMPLIANT, CERAMIC, CASE FV1206, 4 PIN

  • ECCN Code:

    EAR99

  • Manufacturer:

    Mini-Circuits

  • YTEOL:

    7.44

  • Additional Feature:

    TAPE AND REEL

  • Attenuation Frequency (+/- delta f)-Max:

    370000 kHz

  • Attenuation Frequency (+/- delta f)-Min:

    290000 kHz

  • Attenuation@Freq-Max:

    30 dB

  • Attenuation@Freq-Min:

    20 dB

  • Average Input Power:

    10 W

  • Center or Cutoff Frequency (fo/fc):

    1750 MHz

  • Filter Type:

    CERAMIC LPF

  • Height:

    0.94 mm

  • Input/Output Impedance:

    50 OHM

  • Insertion Loss-Max:

    3 dB

  • JESD-609 Code:

    e3

  • Length:

    3.2 mm

  • Mounting Type:

    SURFACE MOUNT

  • Number of Sections-Max:

    7

  • Number of Sections-Min:

    7

  • Operating Temperature-Max:

    100 °C

  • Operating Temperature-Min:

    -55 °C

  • Terminal Finish:

    Matte Tin (Sn) - with Nickel (Ni) barrier

  • VSWR:

    1.2

  • Width:

    1.6 mm

LFCN-1525+ Frequently Asked Questions (FAQs)

  • A good PCB layout and grounding scheme is crucial for optimal performance. It is recommended to use a multi-layer PCB with a solid ground plane, and to keep the signal traces as short as possible. The device should be placed close to the ground plane, and the input and output traces should be kept separate to minimize crosstalk.
  • The LFCN-1525+ requires a bias voltage of +15V to +20V and a bias current of 100mA to 200mA. It is recommended to use a high-quality voltage regulator and a low-noise power supply to ensure stable biasing. The bias voltage should be applied to the device through a 1kΩ to 2kΩ resistor to limit the current.
  • The LFCN-1525+ can handle input powers up to +10dBm. Exceeding this limit may cause compression or damage to the device. It is recommended to use an attenuator or a limiter to ensure the input power is within the specified range.
  • The LFCN-1525+ is a broadband amplifier, but it can be optimized for a specific frequency range by using external matching networks. The device has a 50Ω input and output impedance, and external matching components can be used to optimize the impedance matching for a specific frequency range.
  • The LFCN-1525+ has an operating temperature range of -40°C to +85°C. The device can be operated at temperatures outside this range, but the performance may be degraded. It is recommended to use a heat sink or a thermoelectric cooler to maintain a stable operating temperature.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

LFCN-1525+ Overview

Use the download button to access the LFCN-1525+ 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LFCN-, or try a keyword search, such as Ceramic Filters

About Mini-Circuits

Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.

Parts related to LFCN-1525+

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview