Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LFCN-7200+ - Mini-Circuits

Description: Signal Conditioning LOW PASS FLTR / SURF MT / RoHS

Download LFCN-7200+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LFCN-7200+ - Mini-Circuits - PCB symbol
click to zoom
PCB Footprints
LFCN-7200+ - Mini-Circuits PCB footprint - Other - Other - LFCN-7200+-3
click to zoom
3D Models
LFCN-7200+ - Mini-Circuits - 3D model - Other - LFCN-7200+-3
click to zoom

LFCN-7200+ Details

  • Manufacturer Part Number:

    LFCN-7200+

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, CASE FV1206, 4 PIN

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • Manufacturer:

    Mini-Circuits

  • YTEOL:

    7.44

  • Attenuation Frequency (+/- delta f)-Max:

    1450000 kHz

  • Attenuation Frequency (+/- delta f)-Min:

    1350000 kHz

  • Attenuation@Freq-Max:

    30 dB

  • Attenuation@Freq-Min:

    20 dB

  • Average Input Power:

    8 W

  • Center or Cutoff Frequency (fo/fc):

    8150 MHz

  • Filter Type:

    CERAMIC LPF

  • Height:

    0.94 mm

  • Input/Output Impedance:

    50 OHM

  • Insertion Loss-Max:

    3 dB

  • JESD-609 Code:

    e3

  • Length:

    3.2 mm

  • Mounting Type:

    SURFACE MOUNT

  • Number of Sections-Max:

    7

  • Number of Sections-Min:

    7

  • Number of Terminals:

    4

  • Operating Temperature-Max:

    100 °C

  • Operating Temperature-Min:

    -55 °C

  • Terminal Finish:

    Matte Tin (Sn) - with Nickel (Ni) barrier

  • VSWR:

    1.3

  • Width:

    1.6 mm

LFCN-7200+ Frequently Asked Questions (FAQs)

  • A good PCB layout and grounding scheme is crucial for optimal performance. Mini-Circuits recommends a multi-layer PCB with a solid ground plane, and to keep the signal traces as short as possible. Additionally, it's recommended to use a common ground point for all components and to avoid running signal traces near the edges of the board.
  • To ensure proper biasing, follow the recommended biasing circuit shown in the datasheet. Make sure to use a stable voltage source and a low-noise bias resistor. Additionally, ensure that the bias voltage is within the recommended range (typically 5-15V) and that the current is limited to the recommended maximum (typically 100mA).
  • The LFCN-7200+ is designed to work with a 50-ohm input and output impedance. To ensure optimal performance, it's recommended to use a 50-ohm transmission line or a 50-ohm terminator at the input and output ports. Additionally, ensure that the PCB layout and component selection are optimized for 50-ohm impedance matching.
  • The LFCN-7200+ can generate heat during operation, so proper thermal management is crucial. Ensure good airflow around the device, and consider using a heat sink or thermal pad to dissipate heat. Additionally, follow the recommended operating temperature range (typically -40°C to +85°C) and avoid exceeding the maximum junction temperature (typically 150°C).
  • The LFCN-7200+ is a sensitive device and requires proper ESD protection and handling. Use an ESD wrist strap or mat when handling the device, and ensure that the workspace is ESD-safe. Avoid touching the device's pins or components, and use anti-static packaging and storage materials.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LFCN-7200+ Overview

Use the download button to access the LFCN-7200+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LFCN-, or try a keyword search, such as Ceramic Filters

About Mini-Circuits

Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.

Parts related to LFCN-7200+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑