Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LFCW-8700+ - Mini-Circuits

Description: Signal Conditioning LTCC Low Pass Filter, DC - 8700 MHz, 50ohm

Download LFCW-8700+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LFCW-8700+ - Mini-Circuits - PCB symbol
click to zoom
PCB Footprints
LFCW-8700+ - Mini-Circuits PCB footprint - Other - Other - JC0603C-1_2023
click to zoom
3D Models
LFCW-8700+ - Mini-Circuits - 3D model - Other - JC0603C-1_2023
click to zoom

LFCW-8700+ Details

  • Manufacturer Part Number:

    LFCW-8700+

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • Manufacturer:

    Mini-Circuits

  • YTEOL:

    7.48

  • Average Input Power:

    2.5 W

  • Center or Cutoff Frequency (fo/fc):

    10100 MHz

  • Filter Type:

    CERAMIC LPF

  • Height:

    0.6 mm

  • Input/Output Impedance:

    50 OHM

  • Insertion Loss-Max:

    2.3 dB

  • Length:

    1.6 mm

  • Mounting Type:

    SURFACE MOUNT

  • Number of Sections-Max:

    1

  • Number of Sections-Min:

    1

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -55 °C

  • Width:

    0.8 mm

LFCW-8700+ Frequently Asked Questions (FAQs)

  • Mini-Circuits recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a microstrip transmission line design for the RF signal path. Proper grounding and decoupling of the device are crucial for optimal performance and noise reduction.
  • The biasing resistors should be chosen based on the desired operating current and voltage. A good starting point is to use the recommended values in the datasheet, and then adjust them based on the specific application and performance requirements.
  • The maximum input power that the LFCW-8700+ can handle without damage is +10 dBm. Exceeding this limit may cause permanent damage to the device.
  • To ensure stability and prevent oscillations, it is essential to follow proper PCB layout and grounding practices, use adequate decoupling capacitors, and ensure that the amplifier is properly biased and terminated.
  • The typical noise figure of the LFCW-8700+ amplifier is around 2.5 dB, but this can vary depending on the specific application, operating frequency, and temperature.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LFCW-8700+ Overview

Use the download button to access the LFCW-8700+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LFCW-, or try a keyword search, such as Ceramic Filters

About Mini-Circuits

Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.

Parts related to LFCW-8700+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑