LFL211G92TC1A060 - Murata Electronics

LFL211G92TC1A060 Frequently Asked Questions (FAQs)

• What is the recommended land pattern for LFL211G92TC1A060?
  Murata recommends a land pattern with a pad size of 2.5mm x 1.6mm, with a non-solder mask defined (NSMD) pad shape, and a gap of 0.2mm between the pads.
• Can I use the LFL211G92TC1A060 in a high-temperature environment?
  The LFL211G92TC1A060 is rated for operation up to 125°C, but derating is required above 85°C. Consult the datasheet for specific derating curves and guidelines.
• How do I handle the LFL211G92TC1A060 during PCB assembly to prevent damage?
  Handle the component by the edges, avoid touching the component body, and use a vacuum pick-up tool or tweezers to prevent mechanical stress. Also, ensure the PCB is clean and dry before assembly.
• What is the equivalent series resistance (ESR) of the LFL211G92TC1A060?
  The ESR of the LFL211G92TC1A060 is not explicitly stated in the datasheet, but it can be estimated to be around 0.1-0.2 ohms based on similar inductor models from Murata.
• Can I use the LFL211G92TC1A060 in a high-frequency application?
  The LFL211G92TC1A060 is designed for general-purpose use and is suitable for frequencies up to 1 MHz. However, for high-frequency applications above 1 MHz, consider using a specialized high-frequency inductor from Murata or other manufacturers.