The maximum power dissipation of the LM358FVT-GE2 is dependent on the ambient temperature and the thermal resistance of the package. According to the datasheet, the maximum power dissipation is 670mW at 25°C ambient temperature, but this can be derated to 560mW at 50°C and 450mW at 75°C.
While the LM358FVT-GE2 is an op-amp, it can be used as a comparator in certain applications. However, it's not recommended for high-speed or high-frequency comparator applications due to its limited slew rate and bandwidth. Additionally, the output stage is not designed to drive low-impedance loads, so an external buffer or pull-up resistor may be required.
The input impedance of the LM358FVT-GE2 is typically around 2MΩ, but this can vary depending on the specific application and operating conditions. It's recommended to consult the datasheet and application notes for more information on input impedance and how it affects circuit performance.
Yes, the LM358FVT-GE2 can be used in a single-supply configuration, but the input common-mode voltage range is limited to within 2V of the positive supply rail. This means that the input signal should be biased to be within this range to ensure proper operation.
The output voltage swing of the LM358FVT-GE2 is typically around 26Vpp (13V to -13V) when operated from a ±15V supply. However, this can be affected by the load impedance and other operating conditions, so it's recommended to consult the datasheet and application notes for more information.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
LM358FVT-GE2 Overview
Use the download button to access the LM358FVT-GE2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LM358,
or try a keyword search, such as Operational Amplifiers
