The maximum output power of LNK305DN-TL depends on the input voltage, output voltage, and other design parameters. However, Power Integrations recommends a maximum output power of 3.5 W for this device.
To ensure reliable start-up, make sure the input voltage is within the recommended range (85-265 VAC), and the output capacitor is properly sized to handle the inrush current. Also, ensure that the input voltage is applied slowly (dv/dt < 500 V/ms) to prevent false triggering.
To minimize EMI, keep the PCB layout compact, and use a multi-layer board with a solid ground plane. Keep the input and output traces separate, and use a shielded transformer. Also, place the input filter components (C1, R1, and C2) close to the LNK305DN-TL.
Select a transformer with a turns ratio that matches the input and output voltage requirements. Ensure the transformer has a sufficient isolation voltage rating (at least 1500 VAC) and a low leakage inductance. Consult the Power Integrations application notes for transformer selection guidelines.
The LNK305DN-TL is rated for operation from -40°C to 85°C ambient temperature. However, the device can be derated for higher temperatures, and the maximum junction temperature is 150°C.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
LNK305DN-TL Overview
Use the download button to access the LNK305DN-TL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LNK30,
or try a keyword search, such as Switching Regulator or Controllers
