The maximum output power of LNK305P depends on the input voltage, output voltage, and thermal design. However, as a general guideline, it can deliver up to 5W of output power with a proper thermal design and heat sinking.
To ensure the stability of the output voltage, make sure to follow the recommended layout and component placement guidelines, use a suitable output capacitor with low ESR, and add a feedback resistor (RFB) to the output voltage sense pin (VSENSE) to the output capacitor.
The BYPASS pin is used to connect an external capacitor to the internal voltage regulator, which helps to improve the noise immunity and transient response of the device. It is recommended to connect a 1uF to 10uF capacitor between the BYPASS pin and the GND pin.
The input capacitor value depends on the input voltage, output power, and desired ripple current. A general guideline is to use a capacitor with a value of at least 10uF to 22uF, with a voltage rating of 1.5 to 2 times the input voltage.
The maximum input voltage rating of LNK305P is 30V, but it is recommended to operate the device within the specified input voltage range of 8V to 28V for optimal performance and reliability.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
LNK305P Overview
Use the download button to access the LNK305P schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LNK30,
or try a keyword search, such as Switching Regulator or Controllers
