Part Image

LPC1758FBD80,551 - NXP

Description: MCU 32Bit ARM Cortex M3 512KB Flash 3.3V NXP LPC1758FBD80,551, 32bit ARM Cortex M3 Microcontroller, 100MHz, 512 kB Flash, 80-Pin LQFP

Download LPC1758FBD80,551 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LPC1758FBD80,551 - NXP PCB footprint - Quad Flat Packages - Quad Flat Packages - LQFP80: body 12 x 12 x 1.4 mm
click to zoom
3D Models
LPC1758FBD80,551 - NXP  - 3D model - Quad Flat Packages - LQFP80: body 12 x 12 x 1.4 mm
click to zoom

LPC1758FBD80,551 Details

  • Manufacturer Part Number:

    LPC1758FBD80,551

  • Brand Name:

    NXP Semiconductor

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFP

  • Package Description:

    12 X 12 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT315-1, LQFP-80

  • Pin Count:

    80

  • Manufacturer Package Code:

    SOT315-1

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    3A991.A.2

  • HTS Code:

    8542.31.00.25

  • Manufacturer:

    NXP Semiconductors

  • YTEOL:

    5

  • Has ADC:

    YES

  • Bit Size:

    32

  • Boundary Scan:

    YES

  • CPU Family:

    CORTEX-M3

  • Clock Frequency-Max:

    25 MHz

  • DAC Channels:

    YES

  • DMA Channels:

    YES

  • JESD-30 Code:

    S-PQFP-G80

  • JESD-609 Code:

    e3

  • Length:

    12 mm

  • Moisture Sensitivity Level:

    2

  • Number of I/O Lines:

    52

  • Number of Terminals:

    80

  • On Chip Program ROM Width:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • PWM Channels:

    YES

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LFQFP

  • Package Equivalence Code:

    QFP80,.55SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    FLATPACK, LOW PROFILE, FINE PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • RAM (bytes):

    65536

  • ROM (words):

    524288

  • ROM Programmability:

    FLASH

  • Seated Height-Max:

    1.6 mm

  • Speed:

    100 MHz

  • Supply Current-Max:

    100 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3.3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    12 mm

  • uPs/uCs/Peripheral ICs Type:

    MICROCONTROLLER, RISC

LPC1758FBD80,551 Frequently Asked Questions (FAQs)

  • The maximum clock frequency that can be used with the internal oscillator is 25 MHz. However, it's recommended to use a crystal oscillator or an external clock source for more accurate and stable clocking.
  • The pin multiplexing can be configured using the PINSELx registers. Each peripheral function has a specific pin multiplexing setting, which can be found in the datasheet. The PINSELx registers need to be programmed accordingly to enable the desired peripheral function on a specific pin.
  • The maximum current that can be sourced or sunk by the GPIO pins is 4 mA. However, it's recommended to limit the current to 2 mA to ensure reliable operation and to prevent overheating.
  • To use the ADC in burst mode, the ADC must be configured in scan mode, and the channel selection must be done using the ADCSELx registers. The ADC will then convert the selected channels in sequence, and the conversion results can be read from the ADGDR register.
  • The internal pull-up resistors on the GPIO pins are used to pull the pin high when it is configured as an input. This can be useful for reducing power consumption and noise sensitivity. However, the internal pull-up resistors can be disabled if an external pull-up resistor is used.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LPC1758FBD80,551 Overview

Use the download button to access the LPC1758FBD80,551 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LPC17, or try a keyword search, such as Microcontrollers

About NXP

NXP Semiconductors is a leading manufacturer of semiconductor devices with a wide range of semiconductor solutions, including microcontrollers, sensors, connectivity solutions, power management ICs, and security solutions. These products are used in a variety of applications such as automotive, industrial automation, smart homes, mobile devices, and more. NXP Semiconductors is one of the world’s largest semiconductor companies and is headquartered in Eindhoven, the Netherlands.

Parts related to LPC1758FBD80,551

Showing 0 results

LPC1758FBD80,551 Alternates

Showing results

Image Part Number Model
Part Image LPC1758FBD80Y NXP Semiconductors

RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 100MHz, CMOS, PQFP80

Part Image LPC1758FBD80K NXP Semiconductors

RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 100MHz, CMOS, PQFP80

Part Image LPC1758FBD80 NXP Semiconductors

RISC Microcontroller, 32-Bit, FLASH, 100MHz, CMOS, PQFP80