Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LPC1763FBD100 - NXP

Description: This errata sheet describes both the known functional problems and any deviations from the electrical specifications known at the release date of this document. Each deviation is assigned a number and its history is tracked in a table.

Download LPC1763FBD100 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LPC1763FBD100 - NXP - PCB symbol
click to zoom
PCB Footprints
LPC1763FBD100 - NXP PCB footprint - Quad Flat Packages - Quad Flat Packages - LQFP100
click to zoom
3D Models
LPC1763FBD100 - NXP - 3D model - Quad Flat Packages - LQFP100
click to zoom

LPC1763FBD100 Details

  • Manufacturer Part Number:

    LPC1763FBD100

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFP

  • Package Description:

    LQFP-100

  • Pin Count:

    100

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    3A991.A.2

  • HTS Code:

    8542.31.00.25

  • Manufacturer:

    NXP Semiconductors

  • YTEOL:

    8

  • Has ADC:

    YES

  • Bit Size:

    32

  • Clock Frequency-Max:

    25 MHz

  • DAC Channels:

    YES

  • DMA Channels:

    YES

  • JESD-30 Code:

    S-PQFP-G100

  • JESD-609 Code:

    e3

  • Length:

    14 mm

  • Moisture Sensitivity Level:

    3

  • Number of I/O Lines:

    70

  • Number of Terminals:

    100

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • PWM Channels:

    YES

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LFQFP

  • Package Shape:

    SQUARE

  • Package Style:

    FLATPACK, LOW PROFILE, FINE PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • ROM Programmability:

    FLASH

  • Seated Height-Max:

    1.6 mm

  • Speed:

    100 MHz

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    2.4 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    14 mm

  • uPs/uCs/Peripheral ICs Type:

    MICROCONTROLLER, RISC

LPC1763FBD100 Frequently Asked Questions (FAQs)

  • The internal oscillator can be configured to run up to 25 MHz, but the maximum clock frequency that can be achieved depends on the specific application and the quality of the PCB design. In general, it's recommended to limit the clock frequency to 20 MHz to ensure reliable operation.
  • To configure the USB interface to work in device mode, you need to set the USB_MODE pin high, enable the USB clock, and configure the USB registers to enable device mode. You can refer to the USB chapter in the LPC17xx user manual for more details.
  • The maximum amount of current that can be sourced or sunk by the GPIO pins is 4 mA per pin, with a total current limit of 100 mA for all GPIO pins combined. However, it's recommended to limit the current to 2 mA per pin to ensure reliable operation.
  • To use the ADC to measure analog voltages, you need to configure the ADC pins as analog inputs, select the desired ADC channel, and start the ADC conversion. You can then read the ADC result from the ADC register. Make sure to follow the ADC calibration procedure to ensure accurate results.
  • The BOOT pin is used to select the boot mode of the microcontroller. When the BOOT pin is pulled low, the microcontroller boots from the internal flash memory. When the BOOT pin is pulled high, the microcontroller boots from the external memory interface. You can use the BOOT pin to select the boot mode based on your application requirements.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LPC1763FBD100 Overview

Use the download button to access the LPC1763FBD100 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LPC17, or try a keyword search, such as Microcontrollers

About NXP

NXP Semiconductors is a leading manufacturer of semiconductor devices with a wide range of semiconductor solutions, including microcontrollers, sensors, connectivity solutions, power management ICs, and security solutions. These products are used in a variety of applications such as automotive, industrial automation, smart homes, mobile devices, and more. NXP Semiconductors is one of the world’s largest semiconductor companies and is headquartered in Eindhoven, the Netherlands.

Parts related to LPC1763FBD100

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LPC1763FBD100 Alternates

Showing results

Image Part Number Model
Part Image LPC1763FBD100K NXP Semiconductors

RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 100MHz, CMOS, PQFP100
Part Image LPC1763FBD100Y NXP Semiconductors

RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 100MHz, PQFP100